Hi, welcome to the Repair Forum. If they are a flat panel, yes, they may be cut. It will not be easy to do, however. If you need to cut one, I would recommend you take the panel and dimensions to a heating and cooling shop so they can use a metal brake to cut it squarely and evenly because if you attempt to cut it using tin snips, it will probably damage the edges and the finished product will not likely be aesthetically appealing.
KellyNeed personalized, one on one help for your appliance right away? CLICK HERE!
Please remember our sponsors when making purchases.
Without them this forum would not be possible.Thrifty Appliance Parts
Speedy Appliance Parts
Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and its sponsors cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.